Energy monitoring: where every kWh in your plant goes
We measure the consumption of your plant or building, by line and by machine, and show you where it goes and what you can do to reduce it.
- What we measure
- Power consumption per line and per machine
- Where
- Plants, energy installations and offices
- What you get
- Real-time data, consumption patterns and alerts
- What for
- Reduce consumption and anticipate faults
Energy monitoring continuously measures what each line, each machine or each system in your installation consumes. With that data, excessive consumption patterns become visible and you can decide where to act to reduce them. It is for plants, energy installations and offices that today only know their total consumption.
These are phases 1 and 2 of our industrial data analytics method →
From the first measurement to the first decision, in four steps
-
Step 1
We measure consumption
We fit sensors on the lines, machines or systems you want to monitor.
-
Step 2
You see it in real time
The data arrives on a single dashboard, with its history.
-
Step 3
We look for patterns
We see where and when consumption goes beyond normal, and which systems are starting to fail.
-
Step 4
We decide what to change
With your team, we choose which processes to adjust and which equipment to schedule to consume less.
What it takes to know where the energy goes
These are the most common signals. In the assessment we decide which ones make sense in your installation.
Power consumption
By line and by machine, to see where it goes.
kWhSystem operation
How the energy systems work, to detect problems before they stop.
Temperature and humidity
In offices, to switch heating or cooling on when needed.
°C · %RHOccupancy
In offices, to switch lights on and off depending on whether people are in the room.
Where the consumption goes, and what to do about it
We don’t just leave you a dashboard full of charts: we tell you where to act.
The consumption of each line
Every line and every machine measured, with its history and trend, in real time.
What goes beyond normal
When a consumption or a system goes beyond normal, we alert you so you can plan maintenance before the failure.
Patterns and measures
The excessive consumption patterns we have found and the measures to reduce them.
The ones we install and the ones you already have.
In offices: programmable sockets, lights and climate control.
In offices, with no internet connection.
Energy monitoring in factories, energy and offices
Energy monitoring, in a nutshell
If your question isn’t here, ask us during the assessment.
Which consumption can be measured?
Power consumption by line and by machine, and that of the energy systems in your installation. In the assessment we see what makes sense to measure in yours.
Can I see the data in real time?
Yes. You see it in real time and with its history, to recognise patterns and trends.
Does it also help to prevent faults?
Yes. Monitoring the systems remotely detects problems before they happen, and you can plan preventive maintenance.
Does it work for offices?
Yes. In offices we control temperature, humidity, lights and consumption with programmable devices and occupancy sensors, on a private network with no internet connection. See the smart office.