Not sure where to start?
Tell us which machine worries you and we will tell you what to measure
That is what the assessment is for: seeing what data you already have, what is missing and which solution makes sense.
Solutions
IoT and data solutions for industry
Start with what you want to achieve: see what is happening in your plant or stay ahead of breakdowns. Each solution starts from a specific machine or problem and grows when it makes sense.
Before the machine · Training, safety and accessibility
Train, protect and guide people
Solutions that start with the people who work in or visit your plant: learn without risk, avoid collisions and get where they are going on their own.
Worker training with a digital twin
Your operators practise operation, maintenance and emergencies by walking inside the machine's digital twin, before it arrives.
See the solution →
Occupational risk prevention
Anti-collision for forklifts and virtual reality training.
See the solution →Accessibility in buildings
Indoor guidance with no beacons and no building work, with a route for each person: wheelchair users, blind people or older people.
See the solution →Phases 1 and 2 of the method · Capture and analysis
See what is happening in your plant
Measure where today you estimate and have every piece of data in one place. It is the starting point for everything else.
Industrial sensorisation
We connect sensors, PLCs and ERP, including older machines with no communications.
See the solution →Industrial monitoring
Consumption, temperatures and stoppages across the whole plant on one dashboard, with alerts when something goes out of range.
See the solution →Energy monitoring
Every kWh in your plant or building, measured and explained, so you know where the consumption goes.
See the solution →Smart office
Building automation for offices and businesses on your own private network.
See the solution →Structural monitoring
Humidity and temperature in walls and surfaces, measured continuously to see how they evolve.
See the solution →
Drone inspection
Solar panels and wind turbines inspected from the air, with thermography to locate hot spots.
See the solution →Phases 3, 4 and 5 of the method · Preventive, predictive and proactive
Stay ahead of breakdowns and defects
With the data already measured, the next step is knowing what is going to happen and acting first.
Predictive maintenance
The machine that stops without warning. We fit it with sensors, read its signal for a few weeks and tell you what is wrong and when to step in.
See the solution →Machine vision and hyperspectral imaging
Quality control without touching the product: hyperspectral imaging sees on the line what the eye cannot.
See the solution →
The Alsis method
From measuring to anticipating, in five steps
Each solution is one or more phases of the same method. You can stop at whichever makes sense for your plant.
-
1 · Capture
Sensors where they are missing, and readings from those already there.
-
2 · Analysis
What is normal and what is a warning in each signal.
-
3 · Preventive
Thresholds and alerts before the failure.
-
4 · Predictive
Probable failure date, with its margin.
-
5 · Proactive
Process changes so the failure never happens.
By sector
The most requested solutions in each sector
Sector
Industry
Stoppages nobody sees coming and forklifts in the same aisle as people.
SectorEnergy
Solar and wind farms and consumption you need to see without travelling there.
SectorAgri-food
From the silo and the barrel to the packaging line.
SectorHealth
Motor and cognitive training in virtual reality and on-site prevention.
Frequently asked questions
What people ask us about our solutions
If your question isn't here, ask us during the assessment.
Which IoT solutions make sense for an industrial SME?
The ones that solve a problem that is already costing you money: a machine that stops, consumption you do not understand or an operation that is written down by hand. The usual approach is to start with a single machine or process and grow from there.
What is the difference between a solution and a product?
A product is a specific piece of equipment with its own page. A solution is a tailored project that can combine our products, sensors you already have and the analysis of their data.
Do I have to replace my machines?
No. If the machine has no PLC or communications, external sensors are added without changing it. If it already has a PLC, we read the data it generates.
Where do we start?
With an assessment: we look at which machine or process worries you, what data already exists and what would need to be measured.