TH-P50 digital pressure gauge: pressure, temperature, vibration and orientation in a single device
To keep your equipment's critical variables under control. The TH-P50 is a smart digital pressure gauge that logs pressure, temperature, vibration and orientation, with IoT connectivity.
- What it is
- Smart digital pressure gauge
- What it measures
- Pressure, temperature, vibration and orientation
- What for
- Get a complete view of your equipment's condition
- Where
- Industrial installations under pressure
A pressure gauge only seen by whoever walks past
Pressure says a lot about the condition of a piece of equipment. But if someone has to go and look, it is rarely looked at, and pressure doesn’t tell the whole story.
Readings by hand
Someone has to go, look and write it down. Between one reading and the next, nobody sees what happens.
A single variable
Temperature, vibration or a change in position also warn that something isn’t right.
Data that never leaves the equipment
What the gauge shows stays next to the equipment and never reaches whoever decides on maintenance.
Four variables from each piece of equipment, in a single device
Before talking about the device, we look at your installation with you: which equipment works under pressure and what you want to monitor on each one.
-
What it measures
Pressure, temperature, vibration and orientation. Together they give a complete view of each piece of equipment’s condition.
-
Where it is installed
In industrial installations with circuits and equipment that work under pressure.
-
How we know if it suits you
We go through the equipment and the variables you want to monitor with you, and tell you whether the TH-P50 solves your case or something else is needed.
The essentials of the equipment, in a table
If you need a figure that isn’t here, ask us when you request information.
- Type of equipment
- Smart digital pressure gauge
- Variables
- Pressure, temperature, vibration and orientation
- Connectivity
- IoT
- Cybersecurity
- Reinforced
- Use
- Equipment monitoring in industrial environments
One part of how we monitor your equipment
Predictive maintenance
We read the signal of the machine that worries you and tell you what is wrong and when to step in, before the stoppage.
See the solution → SolutionIndustrial monitoring
Consumption, temperatures and stoppages across the whole plant on one dashboard, with alerts when something goes out of range.
See the solution → SectorIndustry
Machine data, logistics and shop-floor safety for factories and warehouses.
See the sector →Other products in the family
Crash Stopper V.2
Anti-collision system for forklift trucks, so forklifts and pedestrians can share an aisle safely.
See the product sheet →Silo level meter
It measures the level of each silo continuously, with better than 99% accuracy, so you know what is inside without climbing up to look.
See the product sheet →
Sensorised bolt tightening
It records the torque of each bolt at the moment of tightening, so it is traceable and can be audited.
See the product sheet →What people ask us about the TH-P50
If your question isn’t here, ask us when you request information.
How do I request information?
Through the contact form or by calling +34 979 724 985. Tell us which equipment you want to monitor and we will tell you how to proceed.
What does it measure besides pressure?
Temperature, vibration and orientation. All four variables come from the same device and give a complete view of the equipment’s condition.
Does someone have to go and read it?
No. The TH-P50 has IoT connectivity: it logs its readings and you get them without going to look at the gauge.
What about data security?
The device has reinforced cybersecurity. If your IT department needs the details, ask us when you request information.